| Parts Needed: 13 mm socket wrench, socket extension and rubber gloves. |
|
| 1. |
Open hood on the car. |
| 2. |
Find the steering rack clamp on the passenger side of the car. |
[Click Image to Enlarge] |
| 3. |
Loosen the 13 mm bolt on top and the 13 mm screw on the bottom. |
| 4. |
Put on rubber gloves |
| 5. |
Remove existing steering rack clamp. |
[Click Image to Enlarge] |
| 6. |
Add flat backing of the clamp behind the steering rack. |
| 7. |
Add the C-shaped top onto the steering rack. The part fits very snug and you may have to work onto the rack for a minute or two, some people have suggested using wd-40 to help with working it down but I have never done this personally. |
| 8. |
Add the bottom nut over the firewall stud and tighten with your hand. |
| 9. |
Add the top bolt and screw in with your hand. |
[Click Image to Enlarge] |
| 10. |
Tighten both the screw and the nut. |
| 11. |
Remove gloves. |
| 12. |
Now take the car for spin and now feel the difference! |
