| Parts Needed: 13 mm socket wrench, socket extension and rubber gloves. |
|
| 1. |
Remove top screw(13 mm) on clamp.
|
| 2. |
Lightly screw in brace to top of clamp. |
[Click Image to Enlarge]
|
| 3. |
Remove rivet hole with plyers. |
[Click Image to Enlarge] |
| 4. |
Line up the wheel well side of the brace and lightly tighten(7/16). |
| |
[Click Image to Enlarge] |
|
[Click Image to Enlarge] |
|
[Click Image to Enlarge]
|
|
| 5. |
Tighten both ends of the brace and now your done. |
| |
On the 15 inch tires one can easily do this by themselves without taking off the wheel. On the 17 inch viggen rims one will either need to remove the tire to install the brace by themselves, or need the assistance of another person to hold one end of the 7/16 while the other screws it down. |
